DIN Weld Neck Flanges – Type 11 – PN100

DIN Flange Dimensions

PN10 | PN16 | PN25 | PN40 | PN63 | PN100 | PN160 | PN250 | PN320 | PN400

DNDkd4Sd1d3
1010070402.017.232
1510575453.221.334
2013090583.226.942
25140100683.633.752
32155110783.642.462
40170125883.648.370
501951451024.060.390
652201701224.076.1108
802301801385.088.9120
1002652101625.6114.3150
1253152501886.3139.7180
1503552902188.0168.3210
2004303602858.8219.1278
25050543034510.0273.0340
30058550041012.5323.9400
DNDkd4Sd1d3
35065556046514.2355.6460

[google-square-ad]
DIN Flange Dimensions

PN10 | PN16 | PN25 | PN40 | PN63 | PN100 | PN160 | PN250 | PN320 | PN400

DNd2fbh1h2r
10142204564
15142204564
20182224884
25182245884
32222246086
402232662106
502632868106
652633076126
802633278128
1003033690128
12533340105128
150333441151210
200363521301610
250393601571812
300424681701812
DNd2fbh1h2r
350484741892012

[google-square-ad]
DIN Flange Dimensions

PN10 | PN16 | PN25 | PN40 | PN63 | PN100 | PN160 | PN250 | PN320 | PN400

DNNo of BoltsDia. of Hex BoltsLength of Hex BoltsDia. of Stud BoltsSLength of Stud Bolts
104M12601/2″75
154M12601/2″75
204M16655/8″85
254M16705/8″90
324M20753/4″95
404M20803/4″100
504M24907/8″115
658M24907/8″115
808M24957/8″120
1008M271101″135
1258M301201-1/8″150
15012M301251-1/8″160
20012M331451-1/4″185
25012M361651-3/8″205
30016M391851-1/2″230
DNNo of BoltsDia. of Hex BoltsLength of Hex BoltsDia. of Stud BoltsSLength of Stud Bolts
35016M452051-3/4″255

PN10 | PN16 | PN25 | PN40 | PN63 | PN100 | PN160 | PN250 | PN320 | PN400

[google-square-ad]

Legend

D = Outside Diameter
k = Diameter of Bolt Circle
d2 = Diameter of Bolt Holes
d4 = Diameter of Raised Face
f = Height of Raised Face
d1 = Outside Diameter of Neck
b = Flange thickness
h1 = Length of Flange
h2 = Length of right end
d3 = Neck Diameter
r = Radius of Corners
S = Wall thickness

General notes:

  1. Dimensions are in millimeters unless otherwise indicated.
  2. Butt-weld ends (must be specified when ordering) acc. to DIN 3239-1-R6 edge form 22 to DIN 2559 (DIN EN ISO 9692)

Extra notes:

  1. Hex bolt lengths and diameters & lengths of Stud Bolts are calculated.
  2. All bolt lengths calculated without washers, spring washers etc. and free threads (equals 1/3 time bolt diameter).
  3. Gasket thickness considered 3 mm for bolt length calculations.
  4. The dimensions of the bolts are for the type 11 weld neck flange.
  5. Please not that other types of flanges can be have different bolt hole diameters and thicknesses, so that the bolts even can have different dimensions.

PN10 | PN16 | PN25 | PN40 | PN63 | PN100 | PN160 | PN250 | PN320 | PN400